
84 Building a Linux HPC Cluster with xCAT
6.1 Stage 1: Hardware setup
This stage involves configuring the hardware that you have successfully
connected together. This hardware provides the infrastructure upon which the
cluster is built, and enables automated installation of the nodes. The first thing
we need is a network, so the Ethernet switch is configured first, followed by the
Management Processor Adapters and then the terminal servers.
6.1.1 Network switch setup
To configure the network we need to assign an IP address to the control function
of the switch, and configure the ports and VLANs. In our lab, we used a Cisco
3524 switch and these ...