
74 Building a Linux HPC Cluster with xCAT
Finally, enable and start the snmptrapd service:
[root]# chkconfig --add snmptrapd
[root]# service snmptrapd start
5.3.4 Configure TFTP
PXE network boot clients use TFTP to transfer the kernel and all the other files
they need from the boot server. In a small cluster, like the example cluster in our
lab, the master node runs the TFTP server. On larger installations using staging
nodes, each staging node will also run a TFTP server.
To install and start the TFTP server provided with xCAT, run the following
commands:
[root]# rpm -ivh /opt/xcat/post/rpm73/atftp-0.6-1.i386.rpm
[root]# chkconfig --add atftpd
[root ...