Make: Volume 86

parts go on the outside. This gives clearance for

the feet to swing past each other without hitting

(Figure

H

), like the original toy (Figure

I

).

If needed, make more clearance by inserting

small spacing washers on the axle between

the legs and the body. Attach the small acrylic

friction-fit collars on the ends of the axles and

adjust the spacing for easy leg action. Then

lock the collars in position with a tiny drop of

cyanoacrylate glue on the very tip. Tie three or

four of the weights together on a piece of thread

and tie the other end to the hole on the front of

the camel.

Lastly, create a slight bevel on the bottom

of the feet. This allows ...