
12. INSULATE WIRES
To prevent short circuits, insulate any exposed
wires with puffy fabric paint (Figure
R
). Use wax
paper or a drop cloth to protect your fabric from
stains as the paint dries. Alternatively, you can
use electrical tape to insulate the wires.
13. FLASH THE MICROCONTROLLER
Download the candlelight code file, candlelight_
pixels.ino, from the GitHub repository at github.
com/cernst122/candlelight_pixels. This code is
a modified version of Neopixel Flames by Simon
Cleveland (codebender.cc/sketch:271084). Using
the Arduino IDE, open the file and select Adafruit
Gemma 8MHz as the board, and USBtinyISP as
the programmer. Gemma does not ...