Name
dialer map — interface
Synopsis
dialer mapprotocol destination[namehostname] [classname] [broadcast] [spc] [speed {56|64}] [modem-scriptscript-name] [system-scriptscript-name] [dial-string] no dialer mapprotocol destination[namehostname] [classname] [broadcast] [spc] [speed {56|64}] [modem-scriptscript-name] [system-scriptscript-name] [dial-string]
Configures
Any non-DTR dialer interface for PPP callback
Default
None
Description
The dialer map command allows an interface to call one or more different sites by mapping a destination address to connection-specific dial strings and connection scripts.
-
protocol Names the protocol to use for the connection. Valid values are
ip,appletalk,bridge,decnet,ipx,novell,snapshot,vines, andxns.-
destination The destination address to use for this map. The next-hop address of a packet is the destination address in map configurations.
-
name hostname Optional. The name of the remote system for the DDR connection.
-
class name Optional. Names a map class to use for this mapping. A map class is defined with the
map-classcommand.-
broadcast Optional. Allows broadcast packets to be forwarded over this connection.
-
spc Optional. ISDN only; Germany only. Configures a semipermanent connection between the ISDN device and the exchange.
-
speed speed Optional. ISDN only. Defines the speed of an ISDN B channel in Kbps. Valid values are 56 and 64. The default value is 64.
-
modem-script script-name Optional. Names the modem script to use for dialing the ...