Name
dialer pool-member — interface
Synopsis
dialer pool-memberpool-number[priorityvalue] [min-linkvalue] [max-linkvalue] no dialer pool-memberpool-number
Configures
Assigns a physical interface to a dialer pool
Default
Disabled
Description
Any interface can belong to a dialer pool. Dialer pools are configured using the dialer interface. This command assigns an interface to a pool.
-
pool-number The pool to which the interface is assigned.
-
priority value Optional. This value is the interface’s priority within the pool. The interface with the highest priority is selected first for dialing out. This value can be from 0 to 255; the default is 0.
-
min-link value Optional. This is for ISDN lines; it specifies the minimum number of B channels that are reserved on this interface. The value can be from to 255; the default is 0.
-
max-link value Optional. This is for ISDN lines; it specifies the maximum number of B channels that are reserved on this interface. The value can be from to 255; the default is 0.
Example
The following commands assign the ISDN interface BRI1 to dialer pool 1:
interface BRI1 encapsulation ppp dialer pool-member 1 priority 50