August 2005
Intermediate to advanced
798 pages
31h 12m
English
autobaud — line
autobaud [fast] no autobaud
Automatic baud rate detection
Disabled
The autobaud command configures a line to select the incoming baud rate automatically. The baud rate must be between 300 and 115,200. There are two limitations to this command:
Autobaud cannot be used on a connection at rates higher than 19,200 baud when the parity bit is set.
This command cannot be used on outgoing connections.
The optional fast keyword detects the baud rate with exactly three carriage returns.
Many routers do not support the higher baud rates.
The following commands enable automatic baud rate detection on line 3:
Router(config)#line 3Router(config-line)#autobaud
To disable autobaud and to return to the default, use the no form of this command:
Router(config)#line 3Router(config-line)#no autobaud