
2. With the four bottom screws removed, the top of the CueCat plastic housing can easily be
separated from its base (see Figure 3.5).
3. Your successfully opened CueCat should resemble the image in Figure 3.6.
4. The CueCat four-screw PS/2 model is the only version that requires access to the backside
of the circuit board in order to perform the hacks described in this chapter. For that reason,
an additional step is required.The circuit board is held into the plastic housing with four
screws. Using the same jeweler’s Phillips head screwdriver, simply unscrew the screws and
place them in a safe place (see Figure 3.7).
WARNING: HARDWARE HARM
The four internal ...