
To perform this hack, you’ll need a cable with audio, composite video, and S-Video connectors on
one end (the other end is not important, as we’ll be cutting it off ) as shown in Figure 8.58.You can
purchase this type of cable inexpensively from just about anywhere that sells videogames.The cable
we use in this example was purchased for $9.99 at Fry’s Electronics.You’ll also need a five-pin male
DIN connector, as shown in Figure 8.59.This connector will plug into the Atari 8-bit’s monitor port.
The list of parts for this hack are as follows:
■
Five-pin male DIN connector, Fry's Electronics part# DIN-5-M
■
S-Video/composite/audio cable
■
3/16” diameter ...