
We’ll use a blue LED with forward voltage of 3.7V and a brightness of 2600mcd, coupled with a
470 ohm current limiting resistor.You can experiment with different values of resistance if you’d like
a brighter or dimmer LED.The resistor installed in the 7800 is 120 ohms, which, if paired with the
3.7V LED, results in significantly higher light output.
The tools required for this hack are as follows:
■
Phillips head screwdriver, standard size
■
Soldering iron
■
Solder sucker or solder braid
■
Wire cutters
Performing the Hack
Do the following:
1. We first need to open the 7800. Flip the case upside down and remove the five screws
holding the case together, as shown ...