Hardware Hacking

5. Now slide the motherboard upward about an inch and pop it out (see Figure 5.6).

With the case opened, we can now begin to dismantle the chassis:

1. Remove the two screws (shown in Figure 5.7) that hold the hard drive and floppy enclosure

in place.The drive unit will now easily lift out of the case and can be set aside.

2. Next, detach the frame from the front cover.The frame has five screws holding it in place;

four of these screws are pictured in Figure 5.8.

www.syngress.com

116 Chapter 5 • Macintosh

Figure 5.6 Removing the Motherboard

Figure 5.7 Hard Drive Screws

287_HRD_HACK_05.qxd 1/14/04 7:03 PM Page 116

3. To be able to remove the fifth screw that ...