
Removing the Encoding from the USB CueCat
For this hack, a single pin on the microprocessor that controls the CueCat simply needs to be lifted
or cut, which will enable the decoded barcode output.The Hyundai Microelectronics (now Hynix
Semiconductor) HMS91C7316 microprocessor is labeled U2 on the circuit board. Pin 5 is the target
pin that needs to be lifted (denoted with an arrow in Figure 3.35).
Simply use a soldering iron to heat the pin and lift it up with a small jeweler’s screwdriver or the
edge of an X-ACTO knife (see Figure 3.36). If desired, the pin could be clipped off and completely
removed.
WARNING
: HARDWARE HARM
While lifting the desired ...