
Then, slide the plastic DIN connector sleeve over the two metal halves. Push the sleeve over the
metal tab until you have pushed the hole in the plastic sleeve past the tab.This will keep the sleeve in
place so it will not slide backwards.The assembled monitor connector should resemble the image in
Figure 8.69.
Your cable is now complete! Plug the monitor connector into your Atari 8-bit computer (Figure
8.70) and then plug the S-Video or composite connector, as well as the audio connectors, into your
television. Power the system up and you should now see a much sharper and more vibrant picture
than you previously experienced with your computer’s RF ...