Hardware Hacking

semicircular plastic posts. Use your tweezers to squeeze the semicircular plastic posts together.You

might also use a small flat-head screwdriver to wedge the gray plastic pieces apart as you advance to

each plastic post. If you don’t have tweezers, a toothpick can be wedged into the outer circle and used

to leverage the semicircle posts toward each other.

Once the posts are sufficiently squeezed together, you can then slowly and gently pry the gray

cover off. Note that the cover is held in place by two gray tabs tucked neatly into the silver PCMCIA

card edges.You may need to use a small flat-head screwdriver to carefully pry the silver chassis open ...