Professional Windows® Embedded Compact 7

USING WINDOWS NETWORK PROJECTOR

Following are the steps to use the Windows Network Projector device:

1. Attach a projector to the eBox, and connect the eBox and notebook computer to the same Local Area Network, as shown in Figure 42-3.

FIGURE 42-3

2. Power on the projector and eBox.

3. After the projector displays the output from the eBox (refer to Figure 42-2), it’s ready for use.

From the notebook computer, work through the following steps:

1. From the startup menu, select the Accessories group, and click Connect to a Network Projector to bring up the Connect to a Network Projector screen, as shown in Figure 42-4.

FIGURE 42-4

2. Click Search for a Projector. As Windows Network Projector is detected, the screen updates and lists the detected projector in the Available Projectors list, as shown in Figure 42-5.

FIGURE 42-5

3. From the Available Projectors list, click the CeProjector, enter the password from the screen, as shown in Figure 42-6, and click Connect.

FIGURE 42-6

4. As the Connect to a Network Projector Wizard attempts to connect, the Network Projector screen displays ...