
Chapter 17. IBM TotalStorage m-type router implementation 479
17.5 Example configuration
Figure 17-32 shows the configuration used for the example in this chapter.
The FC host contains an FC HBA that is attached to the router on the right. This
is then remotely connected over TCP/IP using iFCP to the router on the left,
which is fibre attached to the SAN16M-2 switch and thus to the FC-attached
DS4400 Storage Server.
Remember that an intelligent port can only act as either an iFCP or an iSCSI
port, but not both. So, if iSCSI host support is required, it needs to use a different
port to attach to the IP network.
Figure 17-32 Laboratory configuration ...