
Chapter 6. IBM TotalStorage b-type router implementation 197
3. Enable the virtual FC ports (port 24 in our case) and GigE ports (ge1 in our
case) now. If the configuration settings are correct, the FCIP tunnel becomes
active (Figure 6-94).
Figure 6-94 FCIP tunnel is active
LSAN configuration using the GUI
Now, we configure the LSAN zones. LSAN zones must be defined on both sides
of the FCIP link. In our case, one side is the edge fabric with the BladeCenter
Fibre Switch Module and SAN18B-R. The other side is the M48 Director, which
contains the SAN Routing Blade in slot 10.
We want to attach the DS400 logical drives to two Blade servers. Our ...