
496 SAN Multiprotocol Routing: An Introduction and Implementation
11.You can also check the status on the switch with the EFCM Element Manager,
which should show the port as an E_Port, as shown in Figure 17-54.
Figure 17-54 Switch E_Port online
17.7.2 Selective import
The last step is to selectively import those devices into the fabric which you want
to be seen by other fabrics connected to the router:
1. From SANvergence Manager, re-open the mSAN Configuration window.
2. Select Actions → Fabric Configuration. The Fabric Configuration window
opens.
3. Select the Selective Import
tab.
4. From the Selected Fabric drop-down list, select 1 - Fabric- ...