
506 SAN Multiprotocol Routing: An Introduction and Implementation
4. Click OK and the warning in Figure 17-64 appears. Click Yes to proceed.
Figure 17-64 Port change warning
We save these changes to flash memory after the next step.
17.8.2 Configuring the iFCP connection
Having configured a TCP/IP port, we now need to configure the iFCP connection,
including a unique mSAN ID for each router. The mSAN ID uniquely identifies the
mSAN containing the router.
Setting the local mSAN ID
From Element Manager, select Configuration → iFCP → Setup and enter a
number in the range 0 to 4,294,967,295. We use 40, as shown in Figure 17-65.
Click OK.
Figure ...