
84 SAN Multiprotocol Routing: An Introduction and Implementation
Because we are connecting two routers together through an FCIP link to form a
backbone fabric, each router device in this fabric needs the same initial setup
performed:
1. Configure an IP address.
2. Upgrade to the latest firmware.
3. Set up the time services correctly.
4. Ensure that the appropriate licenses are installed.
6.1.2 WebTools introduction
After completing the initial setup of the router, including the assignment of an IP
address to the MGMT1 interface, we can connect a patch/drop cable into this
port and physically connect the router to the LAN.
Check that the router ...