
Chapter 2. IBM TotalStorage b-type family routing products 25
By default, the blade will power up in disabled state until the ports are configured
and enabled. The configuration is not stored on the routing blade itself, but by slot
location in the CP. If you move the blade to another slot, the configuration will not
follow; it will be preserved in the previous slot location. If you install another
routing blade to that slot, it will use the existing slot configuration.
One feature currently not supported on the FC Routing Blades is ISL trunking on
EX_Ports.
2.1.3 SAN16B-R (2109-A16)
The 2109-A16 is designed to provide intelligent multiprotoco ...