Chapter 17. IBM TotalStorage m-type router implementation 509
Redundant connection
It is possible to define a redundant failover connection for the iFCP route using
the other IP port on the router. If you want to do this, the other port must also be
configured as an iFCP port with a route to the remote router. The active workload
can be balanced across these ports by exporting different zones on the two
ports. Then, select Configuration → iFCP → Port Redundancy to symmetrically
define both ports as the
backup for each other.
17.8.3 Saving the configuration and resetting
Select File → Save Configuration to save all of the changes to flash memory.
Once complete, select File → Reset System to activate the changes.
17.8.4 Configuring the remote ...